HPR

Part Code: HPR

A ball-on-plate reciprocating system for the measurement of friction and wear under fully sealed, pressurized, and controlled conditions.

  
        The unique removable chamber design allows users to create and control blends in situ quickly and safely.      

        The unique chamber also allows blends to be tested in conditions ranging from high pressure all the way to vacuum.      

        Small test volumes help to reduce test sample costs and wastage.

Request a Quote

Key Features

The HPR is a next-generation friction and wear test system with a fully sealed pressure chamber that can run under high pressure or vacuum.

A unique removable chamber design maintains pressure or vacuum even when off the system, which allows test blends to be made in situ. Combined with low-cost, standard specimens and small test sample volumes, the HPR represents a fast, reliable, and cheap way to test fuels and lubricants.

Applications for the HPR include:

Volatile fuels and blend studies.
Inert gas studies, the small volume of the chamber allows test fluids to be changed in situ and—if necessary—during a test.
The behavior of low-volatility lubricants under very low pressures, giving direct friction and wear measurements under precise test conditions.
Lubricity studies under a controlled atmosphere, for example, hydrogen.
Lubricity of volatile fuels.
The behavior of refrigerants under high pressure.
The study of surface morphology and microstructure of coatings under controlled environments.

  
        The unique removable chamber design allows users to create and control blends in situ quickly and safely.      

        The unique chamber also allows blends to be tested in conditions ranging from high pressure all the way to vacuum.      

        Small test volumes help to reduce test sample costs and wastage.      

        Low-cost, standardized specimens improve the reliability and repeatability of tests.      

        The compact, efficient design of the HPR allows users to save valuable laboratory bench space.

Specifications

  
    Technical Specifications

          Load
          0.1 to 1.0kg with supplied weights
        
          Contact Pressure
          Up to 1.4 GPa
        
          Frequency
          10 to 200 Hz
        
          Stroke Length
          20 μm to 1.8 mm
        
          Temperature Range
          Ambient to 130 °C
        
          Test Sample Volume
          15 ml
        
          Pressure Range
          10⁻⁵ Torr up to 10 Bar
        
          Instrument Power Supply
          100-240 V, 50/60 Hz, 80 VA
        
          Weight
          Mechanical Unit: 34 kg
        
          Control Unit: 10 kg
        
          Size (h x w x d)
          Mechanical Unit: 300 mm x 320 mm x 470 mm 
        
          Control Unit: 400 mm x 150 mm x 370 mm

Technical Specifications
Load	0.1 to 1.0kg with supplied weights
Contact Pressure	Up to 1.4 GPa
Frequency	10 to 200 Hz
Stroke Length	20 μm to 1.8 mm
Temperature Range	Ambient to 130 °C
Test Sample Volume	15 ml
Pressure Range	10⁻⁵ Torr up to 10 Bar
Instrument Power Supply	100-240 V, 50/60 Hz, 80 VA
Weight	Mechanical Unit: 34 kg
	Control Unit: 10 kg
Size (h x w x d)	Mechanical Unit: 300 mm x 320 mm x 470 mm
	Control Unit: 400 mm x 150 mm x 370 mm

Documents

Available documents for download:

HPR Brochure

To access the downloadable documents please enter your details below.

HPR Brochure

928.9KB

Accessories

Featured Accessories

Sorry, no content found.

Industries

Automotive

Lubricity testing of diesel fuels and gasolines
Simulating transmission interactions – e.g. piston rings, cams, engine bearings
Characterizing friction materials for clutch pads

Fuels

Standardized lubricity testing of diesel fuels and gasolines
Standardized lubricity testing of aviation turbine fuels
Validating the performance of sustainable aviation fuels
Developing new biofuels

Green Tribology

Lubricity testing of new biofuels
Developing environmentally acceptable lubricants (EALs)
Investigating high-speed traction phenomena in electric vehicles to improve operational efficiency
Recreating and analyzing failure modes in wind power transmission systems

Industrial

Developing and optimizing metal working fluid formulations
Analyzing the interactions between seals and moving components
Designing advanced coatings to protect surfaces during operation

Lubricants

Developing and optimizing lubricant formulations
Performance testing of industrial greases
Characterizing additive performance
Validating computational friction and wear models

Powertrain

Simulating bearing surface interactions
Simulating gear tooth contact behavior
Determining frictional losses within a system and performing efficiency calculations
Replicating real-world and extreme contact conditions